A ferrite magnets factory produces ceramic magnets for DC motors and generators. This ferrite magnets factory mixes strontium or barium carbonate with iron oxide. The slurry from a ferrite magnets factory is pressed into a wet cake.
The kiln in a ferrite magnets factory operates at 1200°C to sinter the material. After firing, the ferrite magnets factory grinds parts to precise dimensions. A typical ferrite magnets factory produces arc segments for motor stators.
The orientation press in a ferrite magnets factory aligns particles with a magnetic field. A ferrite magnets factory can make isotropic or anisotropic magnets. The anisotropic grade from a ferrite magnets factory has higher energy product.
A ferrite magnets factory uses wet pressing for complex shapes like rings. The grinding line in a ferrite magnets factory uses diamond wheels for tight tolerances. A ferrite magnets factory often supplies magnets for automotive applications.
The coating in a ferrite magnets factory is often a simple epoxy or none at all. Ferrite magnets from a ferrite magnets factory are corrosion‑resistant without coating. A ferrite magnets factory with automated inspection sorts magnets by flux value.
The reject rate in a ferrite magnets factory is below 2% for standard shapes. A ferrite magnets factory can produce 50 million pieces per month. The magnetic properties of a ferrite magnets factory output are tested with a Helmholtz coil. The ferrite magnets factory is essential for cost‑effective motor production.